Article ID : 00204937 / Last Modified : 19/06/2019

Screen Reader

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products or operating systems:

Screen reader works by vocalizing information on the TV screen, such as the program guide and setting screen, which people with visual impairment might not be able to fully acquire from their sight. In order to use the screen reader function, an Internet connection is necessary.

NOTES:

  • The screen reader function is available only for focus points.
  • The screen reader function is available only for some areas and languages.
  • Only some apps such as YouTube™ support screen reader.
  • For eARC supported models, when Screen reader is activated, eARC mode will be set to Off.

Activating Screen reader from the Settings

  1. Press the HOME button on the remote control.
  2. Select Settings, and press the Enter button. The location of Settings depends on the Android OS version.
    NOTES:
    • For Android 8.0, the Settings icon is located at the upper right corner of the Home menu. Press and hold the Up arrow button for about three seconds, press and hold the Right arrow button for about two seconds to select Settings, and press the Enter button.
    • For Android 7.0, the Settings icon is located at the lower left corner of the Home menu. Press and hold the Down arrow button for about three seconds, press and hold the Left arrow button for about two seconds to select Settings, and press the Enter button.
  3. Press the Down arrow button to select Accessibility, and press the Enter button.
  4. Press the Down arrow button to select Screen reader, and press the Enter button
  5. Select Enable and press the Enter button.
  6. Select OK and press the Enter button.

Changing the language

  1. Press the HOME button on the remote control. 
  2. Select Settings, and press the Enter button. The location of Settings depends on the Android OS version.
    NOTES:
    • For Android 8.0, the Settings icon is located at the upper right corner of the Home menu. Press and hold the Up arrow button for about three seconds, press and hold the Right arrow button for about two seconds to select Settings, and press the Enter button.
    • For Android 7.0, the Settings icon is located at the lower left corner of the Home menu. Press and hold the Down arrow button for about three seconds, press and hold the Left arrow button for about two seconds to select Settings, and press the Enter button.
  3. Press the Down arrow button to select Accessibility, and press the Enter button.
  4. Press the Down arrow button to select Text to speech, and press the Enter button.
  5. Press Down arrow button to select Engine configuration, and press the Enter button.
  6. Press Down arrow button to select Language, and press the Enter button.
  7. Select your desired language from the list and press the Enter button. The screen reader function works when the Language in Settings matches the language you selected in Engine configuration.

Changing the speech rate

  1. Press the HOME button on the remote control. 
  2. Select Settings, and press the Enter button. The location of Settings depends on the Android OS version.
    NOTES:
    • For Android 8.0, the Settings icon is located at the upper right corner of the Home menu. Press and hold the Up arrow button for about three seconds, press and hold the Right arrow button for about two seconds to select Settings, and press the Enter button.
    • For Android 7.0, the Settings icon is located at the lower left corner of the Home menu. Press and hold the Down arrow button for about three seconds, press and hold the Left arrow button for about two seconds to select Settings, and press the Enter button.
  3. Press the Down arrow button to select Accessibility, and press the Enter button.
  4. Press the Down arrow button to select Text to speech, and press the Enter button.
  5. Press the Down arrow button to select Speech rate, and press the Enter button.
  6. Select your preferred rate from Very slow to Fastest, and press the Enter button.