IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.
When Exposure Ctrl Type is set to Flexible Exp. Mode (Default setting)
The Auto/Manual switching function is set to Custom Keys for the shutter speed, aperture, and ISO respectively.
You can switch between Auto and Manual by pressing and holding the button.
When set to Manual, the setting can be changed by operating the specified dial.
The operating buttons (in the default settings) and operating dials are as follows.
|Auto/Manual Swt. Set. (Default setting)||Setting dial|
|Shutter speed||Bottom side of the control wheel (Shutter)||Control wheel|
|Aperture||C1 button (Iris)||Front dial|
|ISO||C3 button (ISO)||Rear dial|
In Flexible Exp. Mode, you can set the exposure like in the P/A/S/M Mode without switching the shooting mode by combining Auto/Manual.
|Settings when using in manner equivalent to P Mode (automatic exposure control)||Auto||Auto||Auto/Manual|
|Settings when using in manner equivalent to A Mode (automatic exposure control)||Auto||Manual||Auto/Manual|
|Settings when using in manner equivalent to S Mode (automatic exposure control)||Manual||Auto||Auto/Manual|
|Settings when using in manner equivalent to M Mode (automatic exposure control)||Manual||Manual||Auto|
|Settings when using in manner equivalent to M Mode||Manual||Manual||Manual|
When Exposure Ctrl Type is set to P/A/S/M Mode
You can set the aperture with the front dial and the shutter speed with the rear dial. (Default setting)
To change the ISO, select Exposure/Color - Exposure - ISO sensitivity from the menu and change the setting.
You can also register ISO sensitivity to the Custom Key or Fn menu.
NOTE: C3 (ISO) does not work because it is not for ISO sensitivity but rather a function used in Flexible Exp. Mode called L.Press ISO Auto/Manual.